Bell X-1A, First Flight, Edwards AFB (Contain 2 replicas) (1:144) By DragonWings 1:144 scale Diecast Warbirds
Item Number: DRW51038
About Bell X-1A, First Flight, Edwards AFB (Contain 2 replicas) (1:144)
- Fully detailed 1/144 Bell X-1A
- Two complete models
- Stylish twin metal stand included
- Historically accurate markings
The famous Bell X-1 was the first aircraft to break the sound barrier in level flight. Its development started in 1945, and it was inspired by the shape of a Browning .50-cal machine gun round. The first supersonic test flight occurred on 14 October 1947. A derivative ordered by the US Air Force (USAF) in 1948 was the Bell X-1A, which was an improved design featuring greater fuel capacity and hence a loner engine-burn time. The X-1A looked slightly different with its bubble canopy and longer fuselage, although it was powered by the same Reaction Motors XLR-11 rocket engine. It was intended for research of aerodynamic properties at speeds surpassing Mach 2. The Bell X-1A (with serial number 48-1384) first exceeded Mach 2 in November 1953, but the following month test pilot Captain "Chuck" Yeager achieved a speed record of Mach 2.44. Unfortunately, the experimental plane was later lost in an explosion in August 1955.
Joining earlier versions of the Bell X-1, You can now have an excellent 1/144 scale model of the X-1A in your collection. Because of the fundamental differences between the X-1 and X-1A, the new model has received a brand new fuselage. In fact, Item No.51038 offers not one, but two, complete models in this set! The two models are different too - one is a realistic-looking replica, while the other has a novel transparent fuselage that allows a clear view of the aircraft's innards. Both aircraft can be mounted together in flying mode on a twin metal stand, a configuration that produces a stunning exhibit.
About DragonWings 1:144 scale Diecast Warbirds
Established in 1987, Dragon Models Limited first produced plastic model kits before moving into the airliner model field with their Dragon Wings 1:400 scale line of commercial and national airliners. By Maintaining strict quality standards, and with features such as working parts, accurate markings, true to scale models and excellent manufacturing, the Dragon line of products became leaders in the world of aviation and military models. Collectors will find a wide selection of diecast aircrafts, space crafts, tanks in their Dragon Armor line, 1:6 scale action figures from their New Generation Life Action Figure series, 1:72 scale fighter aircrafts from their Warbirds series and more. Dragon Model Limited released over a 1,000 different model kits and pre-constructed models, and they may also be found under the brand labels of "Revell/Monogram" in the USA, "Revell" and "Italeri" in Europe, and "Hasegawa" and "GSI" in Japan. Production of the Dragon Wings airliners, warebirds, and Dragon Armor tanks ceased in 2008. Remaining stock of these popular models is limited and at www.AirlineMuseum.com we have the largest selection of closeout Dragon Wings models at low, low closeout prices.
About this scale
1:144 Scale models, while not as common as 1:72, are still a good scale for collectors. This scale is often used for larger military and space models that would be too large or expensive in 1:72 scale.
See all Dragon Wings 1:144 Scale Models